12/24V Solar Distribution Board - Pre-wired Control Panel

Special Order




The 12/24V Solar Distribution Board is a wall-mountable control centre with a pre-wired distribution box [REG-L00] and a Triple HRC Fuse Isolating Switch [FUS-300].

The spacious distribution box (Gewiss®) contains
- 12 breaker DIN rail
- 1 x 2 Amp circuit breaker for regulator circuit
- 2 x 20 Amp breakers for solar circuits
- 1 x 10 Amp breaker for load circuit
- 1 Solar negative link with 6 holes for 13.6 mm² cable and 2 holes for 25 mm² cable
- 1 battery negative link with 6 holes for 13.6 mm² cable, 2 holes for 25 mm² cable and two 8mm lug
- 1 x positive multi-hole link (load circuit)
- 200A shunt
- internal wiring and labels

The isolator is a 3 position housing for type NT00 low voltage high rupture capacity (HRC) fuse links.

Also included: spark hazard & shutdown procedure signs as well as Main Battery Isolator label (all engraved).

The Solar Distribution Board is a base unit for an advanced 12V or 24V solar power control panel. There's enough room to add a regulator (charge controller), an inverter (up to 3000W @ 24V, or 1500W @ 12V), a battery charger and other monitoring devices.

Please use our system design tool to compile a fully functional solar power system. The tool will add all required bits and will give you an instant quote that includes all pre-wiring and testing.

Note: a pre-wired control board reduces installation time and expense significantly.

Weight: 15.6 Kilograms
Warranty: 1yr
Code: SDB-2400
Price: $699.13


12/24V Solar Distribution Board - Pre-wired Control Panel
Distribution Box
System voltage12V or 24V
DIN rail12 pole
Breakers1 x 2A, 2 x 20A, 1 x 10A
Shunt200A, 75mV
Isolating Switch
Insulation voltage (AC)690V
Insulation voltage (DC)250V
Max current160A (per circuit)
Fuse typeNT00
Dimensions (mm)835(W) x 1200(H) x 60(D) excl. fittings
Materialconstruction grade 17mm plywood

Related Products

No related products.

We install solar systems in Northern NSW and Southern QLD.

Gold Coast (from Coolangatta to Southport), Nerang and Hinterland (Beaudesert) and out West (Warwick, Stanthorpe, Killarney)

Northern NSW (Tweed Heads to Yamba, including Evans Head, Byron Bay and Ballina); the Far North Coast Hinterland (Grafton via Lismore to Murwillumbah) and out West (Casino to Tenterfield, including Drake and Tabulam, as well as Woodenbong and Bonalbo)

For larger system we also go up to Brisbane or down to Coffs Harbour and even Glen Innes. Other places by arrangement.