Accumulator Tank - Pressure Tank - 20 Litres




20 Litre Horizontal Pressurised Water Storage Tank

An accumulator tank is pressure storage vessel and/or pulsation-dampening device designed to hold water under pressure. The accumulator tank provides additional water storage to assist the pump in meeting the total demands of the system. It extends pressure switch-controlled pump life by reducing pump on-off pulsation. They also eliminate "water hammering".

Accumulator or Pressure tanks should be installed with a pressure relief valve. Failure to install a relief valve may result in tank or pipe explosion in the event of a system malfunction.

Check tank pressure with ordinary tyre gauge. Pre-charge should be equal to, or 2PSI below, pressure switch cut in setting.

Weight: 6 Kilograms
Warranty: 5yrs
Code: PMP-012
Price: $170.00


Accumulator Tank - Pressure Tank - 20 Litres
Factory pre-charge28 psi (1.9 bar)
Max working pressure150 psi (10 bar)
Max temperature90° C
Volume20 litres
- Cylinder264mm (ø)
- Total height inc. stand295mm
- Total length from end to end441mm

Related Products

No related products.

We install solar systems in Northern NSW and Southern QLD.

Gold Coast (from Coolangatta to Southport), Nerang and Hinterland (Beaudesert) and out West (Warwick, Stanthorpe, Killarney)

Northern NSW (Tweed Heads to Yamba, including Evans Head, Byron Bay and Ballina); the Far North Coast Hinterland (Grafton via Lismore to Murwillumbah) and out West (Casino to Tenterfield, including Drake and Tabulam, as well as Woodenbong and Bonalbo)

For larger system we also go up to Brisbane or down to Coffs Harbour and even Glen Innes. Other places by arrangement.