My Account
My Shopping Cart
Share this page
Air Diversion Load Element - 48 Volt
Air Diversion Load Element - 48 Volt DC
Diversion load for use with diversion load regulator or for solid state DC relays via Outback FlexMax FM60/80’s.
A diversion load is required to dissipate excess power. Typically, with micro-hydro units diversion occurs regularly due to the constant power generation and hence it is advantageous to divert to a hot water heater element (special element required) to make use of this excess power.
Diversion loads need to be very robust and where there is any chance of failure a secondary diversion load to an air resistive element should be installed.
The Air-Diversion Element should dissipate power through an air-resistive coil that expends excess power through generation of heat.
Specifications:
48V DC
30-35Amp
Good for:
1440 Watts of a 48V DC battery
Weight: 4 Kilograms
Code: HYD-100-P03
Price: $285.00 Air Diversion Load Element - 48 Volt Air Diversion Load 48V 30-35Amp
Diversion load for use with diversion load regulator or for solid state DC relays via Outback FlexMax FM60/80’s.
A diversion load is required to dissipate excess power. Typically, with micro-hydro units diversion occurs regularly due to the constant power generation and hence it is advantageous to divert to a hot water heater element (special element required) to make use of this excess power.
Diversion loads need to be very robust and where there is any chance of failure a secondary diversion load to an air resistive element should be installed.
The Air-Diversion Element should dissipate power through an air-resistive coil that expends excess power through generation of heat.
Specifications:
48V DC
30-35Amp
Good for:
1440 Watts of a 48V DC battery
Weight: 4 Kilograms
Code: HYD-100-P03
Price: $285.00 Air Diversion Load Element - 48 Volt Air Diversion Load 48V 30-35Amp
No downloads for this product.
Close
QLD:
Gold Coast (from Coolangatta to Southport), Nerang and Hinterland (Beaudesert) and out West (Warwick, Stanthorpe, Killarney)
NSW:
Northern NSW (Tweed Heads to Yamba, including Evans Head, Byron Bay and Ballina); the Far North Coast Hinterland (Grafton via Lismore to Murwillumbah) and out West (Casino to Tenterfield, including Drake and Tabulam, as well as Woodenbong and Bonalbo)
For larger system we also go up to Brisbane or down to Coffs Harbour and even Glen Innes. Other places by arrangement.
We install solar systems in Northern NSW and Southern QLD.
QLD:
Gold Coast (from Coolangatta to Southport), Nerang and Hinterland (Beaudesert) and out West (Warwick, Stanthorpe, Killarney)
NSW:
Northern NSW (Tweed Heads to Yamba, including Evans Head, Byron Bay and Ballina); the Far North Coast Hinterland (Grafton via Lismore to Murwillumbah) and out West (Casino to Tenterfield, including Drake and Tabulam, as well as Woodenbong and Bonalbo)
For larger system we also go up to Brisbane or down to Coffs Harbour and even Glen Innes. Other places by arrangement.