Clenergy Solar Frame Kit - 15-30° Tilt - 3405mm Rails

Product discontinued


4 x 35mm mid-size Solar Panel Tilt Frame

Corrosion resistant aluminium adjustable tilt frame kit with 2 x 3405 mm rails suitable to mount 4 x Trina 210W (35mm) or 3 x Trina 260W solar panels to a tin roof (up to 30° pitch).

The kit includes everything you need incl. hex head wood screws for the legs. View a Video Tutorial.

The frame kit includes:
2 x 3405mm rails
4 x end clamps (35mm)
8 x mid clamps (35mm)
4 x long adjustable tilt legs
4 x short legs
8 earth washers
2 x Rail Joiner
Ground Lug

Clenergy frames are fully compliant with the Australian/New Zealand standard on wind actions AS/NZS1170.2, making it suitable for a wide variety of building types and climatic zones.

Warning: This frame was compiled for installation in Australian wind zones A or B, for a roof not higher than 5 metres.

The installer is solely responsible for correct frame configuration and installation. Please consult the installation manual for appropriate spacing between the tilt legs (and add more if required).

- Anodised aluminium
- Building height up to 20m
- Roof slope to 60°
- Static load capacity up to 1400N/m²
- Corrosion resistant, providing low maintenance and extended product life cycle.
- Easy to install with adjustable locking devices (Z module).
- Complies with AS/NZS 1170 and other international standards.

Weight: 17 Kilograms
Warranty: 10yrs


Related Products

No related products.

We install solar systems in Northern NSW and Southern QLD.

Gold Coast (from Coolangatta to Southport), Nerang and Hinterland (Beaudesert) and out West (Warwick, Stanthorpe, Killarney)

Northern NSW (Tweed Heads to Yamba, including Evans Head, Byron Bay and Ballina); the Far North Coast Hinterland (Grafton via Lismore to Murwillumbah) and out West (Casino to Tenterfield, including Drake and Tabulam, as well as Woodenbong and Bonalbo)

For larger system we also go up to Brisbane or down to Coffs Harbour and even Glen Innes. Other places by arrangement.