My Account
My Shopping Cart
Share this page
DC Isolator for Solar Photovoltaic (PV) Power System
This DC switch disconnector (KFD25) for solar photovoltaic (PV) power supply systems was specifically designed for the demands of the Australian market.
Available in totally insulated enclosures with red/yellow padlockable handle and with a degree of protection to IP 66/67, they can be installed in the most arduous of environments. The switch can be mounted vertically, horizontally, or sideways and will retain its IP66/67 protection rating.
The 25 Amp DC Isolator consists of 2 x 3 pole switches, each one capable of switching a maximum of 1200V DC.
General Data
According to EN 60947-3 respectively VDE 0660 Part 107, IEC60364-7-712:2002, AS NZS5033
Utilisation Category: DC-21B
Ambient Temperature: 50° C
Terminal Lugs finger-proof according to VDE 0660-514 and BGV A3, IP 20
Made in Germany
UV Resistant
Non Polarised
Switchable under load
Maximum permissable wire size
Flexible 4mm˛
Flexible 6mm˛ with ferrule
Single core or stranded 6mm˛
Enclosure
Plastic Enclosure, Protection IP66/67, totally insulated
Red handle and contrasting yellow escutcheon plate, OFF position lockable with padlocks
Ratings
Max current: 25A
1.2 Voc 2 pol: 1020V @ 25A
1.2 Voc on each side: 510V @ 25A
Insulation Voltage: 1500V
Weight: 0.45 Kilograms
Code: FPV-S001
Price: $120.00 DC Isolator for Solar Photovoltaic (PV) Power System DC Isolator Switch 2x510V 25A IP67
Available in totally insulated enclosures with red/yellow padlockable handle and with a degree of protection to IP 66/67, they can be installed in the most arduous of environments. The switch can be mounted vertically, horizontally, or sideways and will retain its IP66/67 protection rating.
The 25 Amp DC Isolator consists of 2 x 3 pole switches, each one capable of switching a maximum of 1200V DC.
General Data
According to EN 60947-3 respectively VDE 0660 Part 107, IEC60364-7-712:2002, AS NZS5033
Utilisation Category: DC-21B
Ambient Temperature: 50° C
Terminal Lugs finger-proof according to VDE 0660-514 and BGV A3, IP 20
Made in Germany
UV Resistant
Non Polarised
Switchable under load
Maximum permissable wire size
Flexible 4mm˛
Flexible 6mm˛ with ferrule
Single core or stranded 6mm˛
Enclosure
Plastic Enclosure, Protection IP66/67, totally insulated
Red handle and contrasting yellow escutcheon plate, OFF position lockable with padlocks
Ratings
Max current: 25A
1.2 Voc 2 pol: 1020V @ 25A
1.2 Voc on each side: 510V @ 25A
Insulation Voltage: 1500V
Weight: 0.45 Kilograms
Code: FPV-S001
Price: $120.00 DC Isolator for Solar Photovoltaic (PV) Power System DC Isolator Switch 2x510V 25A IP67
- 1: DC Isolator Switch KFD25 (461Kb)
Close
QLD:
Gold Coast (from Coolangatta to Southport), Nerang and Hinterland (Beaudesert) and out West (Warwick, Stanthorpe, Killarney)
NSW:
Northern NSW (Tweed Heads to Yamba, including Evans Head, Byron Bay and Ballina); the Far North Coast Hinterland (Grafton via Lismore to Murwillumbah) and out West (Casino to Tenterfield, including Drake and Tabulam, as well as Woodenbong and Bonalbo)
For larger system we also go up to Brisbane or down to Coffs Harbour and even Glen Innes. Other places by arrangement.
We install solar systems in Northern NSW and Southern QLD.
QLD:
Gold Coast (from Coolangatta to Southport), Nerang and Hinterland (Beaudesert) and out West (Warwick, Stanthorpe, Killarney)
NSW:
Northern NSW (Tweed Heads to Yamba, including Evans Head, Byron Bay and Ballina); the Far North Coast Hinterland (Grafton via Lismore to Murwillumbah) and out West (Casino to Tenterfield, including Drake and Tabulam, as well as Woodenbong and Bonalbo)
For larger system we also go up to Brisbane or down to Coffs Harbour and even Glen Innes. Other places by arrangement.