Products
My Account
Share this page
Grundfos 240VAC Mains Pressure Pump
0.30 kw peripheral centrifugal pump with lead and plug, 25mm female inlet and 25 mm female outlet
- Cast Iron body and motor support
- Brass Impeller
- Built in overload protection
- Max 40 l/min over 30 meter head
- 1 Tap =10 L/min ... 1 Sprinkler = 15 L/min
- Pressure switch and 8l Pressure Tank
Grundfos pressure tanks are all ideally suited and approved for use with drinking water. The material used ensures that there is absolutely no risk of the tank contaminating its precious contents.
Whatever it is for drinking water, industrial domestic or recreational purposes the Grundfos GT tanks series assure you reliable supply in your water system.
The beauty of a pressure tank The right pressure tank saves you money by significantly increasing pump efficiency and thereby minimising electricity consumption, by acting as a buffer, the tank allows the pump to run for longer continuous periods and its optimal duty point - i.e. maximum efficiency. It is otherwise very expensive to have the pump run at full speed to provide only small amounts of water.
Reducing the number of start/stops will extend the life of your pump. With a tank to act as a buffer, the pump does not have to run every time a tap is opened. Considerable amounts of water can then be used without any pump action at all. A pressure tank is an assurance of smooth operation and will protect the pump against water hammering in the pipe system.
This pump should be used in conjunction with a non return valve (not supplied) to prevent water returning to your tank when the pump turns off. If there is no non return valve the pump will continually stop and start. Also please be sure to charge the air cylinder before use.
We recommend this pump if you have an inverter. Test results for Grundfos pump run from an inverter:
22.5l/min @22psi 13A @ 25V DC
15l/min @ 30 psi 16A @ 25V DC
maximum measured start up current : 30A @ 25 V DC
Weight: 10 Kilograms
Warranty: 1yr
Code: PMP-G001
Price: $370.00
- Cast Iron body and motor support
- Brass Impeller
- Built in overload protection
- Max 40 l/min over 30 meter head
- 1 Tap =10 L/min ... 1 Sprinkler = 15 L/min
- Pressure switch and 8l Pressure Tank
Grundfos pressure tanks are all ideally suited and approved for use with drinking water. The material used ensures that there is absolutely no risk of the tank contaminating its precious contents.
Whatever it is for drinking water, industrial domestic or recreational purposes the Grundfos GT tanks series assure you reliable supply in your water system.
The beauty of a pressure tank The right pressure tank saves you money by significantly increasing pump efficiency and thereby minimising electricity consumption, by acting as a buffer, the tank allows the pump to run for longer continuous periods and its optimal duty point - i.e. maximum efficiency. It is otherwise very expensive to have the pump run at full speed to provide only small amounts of water.
Reducing the number of start/stops will extend the life of your pump. With a tank to act as a buffer, the pump does not have to run every time a tap is opened. Considerable amounts of water can then be used without any pump action at all. A pressure tank is an assurance of smooth operation and will protect the pump against water hammering in the pipe system.
This pump should be used in conjunction with a non return valve (not supplied) to prevent water returning to your tank when the pump turns off. If there is no non return valve the pump will continually stop and start. Also please be sure to charge the air cylinder before use.
We recommend this pump if you have an inverter. Test results for Grundfos pump run from an inverter:
22.5l/min @22psi 13A @ 25V DC
15l/min @ 30 psi 16A @ 25V DC
maximum measured start up current : 30A @ 25 V DC
Weight: 10 Kilograms
Warranty: 1yr
Code: PMP-G001
Price: $370.00
No downloads for this product.
We install solar systems in Northern NSW and Southern QLD.
QLD:
Gold Coast (from Coolangatta to Southport), Nerang and Hinterland (Beaudesert) and out West (Warwick, Stanthorpe, Killarney)
NSW:
Northern NSW (Tweed Heads to Yamba, including Evans Head, Byron Bay and Ballina); the Far North Coast Hinterland (Grafton via Lismore to Murwillumbah) and out West (Casino to Tenterfield, including Drake and Tabulam, as well as Woodenbong and Bonalbo)
For larger system we also go up to Brisbane or down to Coffs Harbour and even Glen Innes. Other places by arrangement.