Products
My Account
Share this page
Johnson Viking Power - 12 Volt - Drain & Waste Water Pump
12 Volt water pump - Viking Power 16
For shower drains, bilge and waste water. Specifically designed to pump waste water, the Viking Power 16 is an ultramodern, single-chamber self-priming diaphragm pump that can be set up in several different pump/motor configurations.
Perfect for installation in tight spaces, the Viking Power 16 can be installed anywhere after the drain outlet in the wastewater system or as a bilge pump in any leisure craft -- new or used. Compact, robust and adaptable the Viking Power 16 has KlickTite™ XL connectors fitted as standard, literally making hose connections a snap! (Delivered with 1" & 3/4" hose and 1/2" BSP (NPT) KlickTite™ XL connectors.)
The Viking Power 16 features non-choke valves, which means that no in-line filters are necessary. The pump can not only be run dry, it can also handle a mixture of air and water without difficulty. The Viking Power 16 is self-priming up to a height of 3 meters.
With its low pulse and muffled rubber bracket, this pump offers quiet operation. The Viking Power 16 has been built to last, and engineered for easy maintenance. When it comes time to replace the premium grade reinforced nitrile rubber diaphragm, you can put in a spare without even removing the pump from the system.
CE-approved
Features Specially designed to pump waste water Easy to install, even in tight spaces Quiet operation Easy, low-cost maintenance High-impact fibreglass reinforced nylon body Ball-bearing supported transmission Non-choke valves - no filters required Self-priming up to 3 m (9.8 feet) Can be run dry and can pump air/water mixture Robust single diaphragm KlickTite™ XL connectors standard 12V motor Low power consumption Complies with ISO15083 small craft bilge pump standards for vessels up to 12 m (39.4 feet)
Specs
Capacity (open flow): 16 L/min
Capacity (at 0.1 bar): 15 L/min
Max. head: 3m
Max. lift: 3m
Max. head & lift: 4m
Dimensions (mm): 186(L) x 235/181(W) x 118/204(H)
Motor: 40W at 1 m head (with built-in thermal protector)
Pump body: Nylon, fibreglass reinforced
Valves: Nitrile rubber
Diaphragm: Reinforced nitrile rubber
Voltage: 12V DC
Current: 8A
Hose connection: KlickTite™ XL connectors for 1" & 3/4" hose and 1/2" BSP (NPT) threads: straight and 90°
Weight: 3 Kilograms
Warranty: 1+2yr
Code: PMP-JW12
Price: $600.00
For shower drains, bilge and waste water. Specifically designed to pump waste water, the Viking Power 16 is an ultramodern, single-chamber self-priming diaphragm pump that can be set up in several different pump/motor configurations.
Perfect for installation in tight spaces, the Viking Power 16 can be installed anywhere after the drain outlet in the wastewater system or as a bilge pump in any leisure craft -- new or used. Compact, robust and adaptable the Viking Power 16 has KlickTite™ XL connectors fitted as standard, literally making hose connections a snap! (Delivered with 1" & 3/4" hose and 1/2" BSP (NPT) KlickTite™ XL connectors.)
The Viking Power 16 features non-choke valves, which means that no in-line filters are necessary. The pump can not only be run dry, it can also handle a mixture of air and water without difficulty. The Viking Power 16 is self-priming up to a height of 3 meters.
With its low pulse and muffled rubber bracket, this pump offers quiet operation. The Viking Power 16 has been built to last, and engineered for easy maintenance. When it comes time to replace the premium grade reinforced nitrile rubber diaphragm, you can put in a spare without even removing the pump from the system.
CE-approved
Features Specially designed to pump waste water Easy to install, even in tight spaces Quiet operation Easy, low-cost maintenance High-impact fibreglass reinforced nylon body Ball-bearing supported transmission Non-choke valves - no filters required Self-priming up to 3 m (9.8 feet) Can be run dry and can pump air/water mixture Robust single diaphragm KlickTite™ XL connectors standard 12V motor Low power consumption Complies with ISO15083 small craft bilge pump standards for vessels up to 12 m (39.4 feet)
Specs
Capacity (open flow): 16 L/min
Capacity (at 0.1 bar): 15 L/min
Max. head: 3m
Max. lift: 3m
Max. head & lift: 4m
Dimensions (mm): 186(L) x 235/181(W) x 118/204(H)
Motor: 40W at 1 m head (with built-in thermal protector)
Pump body: Nylon, fibreglass reinforced
Valves: Nitrile rubber
Diaphragm: Reinforced nitrile rubber
Voltage: 12V DC
Current: 8A
Hose connection: KlickTite™ XL connectors for 1" & 3/4" hose and 1/2" BSP (NPT) threads: straight and 90°
Weight: 3 Kilograms
Warranty: 1+2yr
Code: PMP-JW12
Price: $600.00
- 1: Johnson Viking Power Instruction Manual (402Kb)
We install solar systems in Northern NSW and Southern QLD.
QLD:
Gold Coast (from Coolangatta to Southport), Nerang and Hinterland (Beaudesert) and out West (Warwick, Stanthorpe, Killarney)
NSW:
Northern NSW (Tweed Heads to Yamba, including Evans Head, Byron Bay and Ballina); the Far North Coast Hinterland (Grafton via Lismore to Murwillumbah) and out West (Casino to Tenterfield, including Drake and Tabulam, as well as Woodenbong and Bonalbo)
For larger system we also go up to Brisbane or down to Coffs Harbour and even Glen Innes. Other places by arrangement.