Products
My Account
Share this page
PowerSpout Sealed Bearing Set
Top quality front and back sealed bearings with re-greasing nipple.
Front 6205-2Z OD 52mm ID 25mm and rear 6005-2Z OD 47mm ID 25mm.
Sealed bearings do need to be re-greased at times as hydro turbines run 24/7 and see very high cycle rates.
The PowerSpout is provided with a re-greasing nipple so this can be easily done with the turbine in operation.
Refer to manual for re-greasing schedule. Lower quality and cost bearings can be used where the turbine is operating at powers below 500W and 1000 rpm.
Weight: 0.5 Kilograms
Code: HYD-100-P04
Price: $55.00
Front 6205-2Z OD 52mm ID 25mm and rear 6005-2Z OD 47mm ID 25mm.
Sealed bearings do need to be re-greased at times as hydro turbines run 24/7 and see very high cycle rates.
The PowerSpout is provided with a re-greasing nipple so this can be easily done with the turbine in operation.
Refer to manual for re-greasing schedule. Lower quality and cost bearings can be used where the turbine is operating at powers below 500W and 1000 rpm.
Weight: 0.5 Kilograms
Code: HYD-100-P04
Price: $55.00
No downloads for this product.
Showing 1 to 3 (of 5 items)
| Products | Price | Buy Now | |
 | PowerSpout BE - Battery Enabled 0-250M Cable Length | $1750.00 |  |
 | PowerSpout Spare Pelton Spoons 20 Pack | $140.00 | |
 | PowerSpout GE400 Grid Enabled 0-2000M Cable Length | $2630.00 | |
Showing 1 to 3 (of 5 items)
We install solar systems in Northern NSW and Southern QLD.
QLD:
Gold Coast (from Coolangatta to Southport), Nerang and Hinterland (Beaudesert) and out West (Warwick, Stanthorpe, Killarney)
NSW:
Northern NSW (Tweed Heads to Yamba, including Evans Head, Byron Bay and Ballina); the Far North Coast Hinterland (Grafton via Lismore to Murwillumbah) and out West (Casino to Tenterfield, including Drake and Tabulam, as well as Woodenbong and Bonalbo)
For larger system we also go up to Brisbane or down to Coffs Harbour and even Glen Innes. Other places by arrangement.