Products
My Account
Share this page
Digital Clamp Meter - 30mm Jaw Opening - AC/DC 400 Amp
Top of the range 400A AC/DC clamp meter
Easy one-hand operation make this meter perfect for the working installer or tradesman. This is a quality, intermediate-level clamp meter with more than useful current ranges up to 400 amps AC and DC.
Features:
Autoranging
Relative mode
Diode test
Audible continuity
Data hold
Min/max mode
Auto power-off
Jaw opening 30mm
Temperature probe
Carrying case
Specifications:
Display: 4000 count
Category: Cat III 600V
Basic accuracy: 1.00%
Range V/DC:400mV - 600V
Range V/AC: 4 - 600V
Range A/AC: 40 - 400A
Range A/DC: 40 - 400A
Range resistance: 400R - 40M
Range temperature: -20 - 760°C (-4 - 1400°F)
Range capacitance: 40nF - 100΅F
Range frequency: 10Hz - 10kHz
Ave/RMS: Ave
Dimensions (mm): 200(H) x 66(W) x 37(D)
Customer Feedback: "I love my clamp meter. Firstly it is not a fluke! and it's not a primary instrument but a wonderful compliment to an accurate multimeter. I have tried 2 units and both read well for a dc clamp meter. It can never be as accurate as a precision shunt however 100mA either way or a point is fantastic accuracy for the price. The DC zero is fast and reliable and the deep but small Jaws get easily around wires in junction boxes. As well as zero there is a hold function but I have never used one on any meter. Personally I find it sensitive enough to detect the twisting of the active conductor or check where AC should appear in fittings and leads. So I defiantly give this one full marks: its cheap, uses AAA batteries, has a frequency meter, wrist strap and a soft carry case to go. Craig."
Weight: 0.43 Kilograms
Warranty: 3 mths
Code: MET-013
Price: $119.00
Easy one-hand operation make this meter perfect for the working installer or tradesman. This is a quality, intermediate-level clamp meter with more than useful current ranges up to 400 amps AC and DC.
Features:
Autoranging
Relative mode
Diode test
Audible continuity
Data hold
Min/max mode
Auto power-off
Jaw opening 30mm
Temperature probe
Carrying case
Specifications:
Display: 4000 count
Category: Cat III 600V
Basic accuracy: 1.00%
Range V/DC:400mV - 600V
Range V/AC: 4 - 600V
Range A/AC: 40 - 400A
Range A/DC: 40 - 400A
Range resistance: 400R - 40M
Range temperature: -20 - 760°C (-4 - 1400°F)
Range capacitance: 40nF - 100΅F
Range frequency: 10Hz - 10kHz
Ave/RMS: Ave
Dimensions (mm): 200(H) x 66(W) x 37(D)
Customer Feedback: "I love my clamp meter. Firstly it is not a fluke! and it's not a primary instrument but a wonderful compliment to an accurate multimeter. I have tried 2 units and both read well for a dc clamp meter. It can never be as accurate as a precision shunt however 100mA either way or a point is fantastic accuracy for the price. The DC zero is fast and reliable and the deep but small Jaws get easily around wires in junction boxes. As well as zero there is a hold function but I have never used one on any meter. Personally I find it sensitive enough to detect the twisting of the active conductor or check where AC should appear in fittings and leads. So I defiantly give this one full marks: its cheap, uses AAA batteries, has a frequency meter, wrist strap and a soft carry case to go. Craig."
Weight: 0.43 Kilograms
Warranty: 3 mths
Code: MET-013
Price: $119.00
- 1: MET-013 Instructions (1876Kb)
- 2: Soc-monitoring (36Kb)
We install solar systems in Northern NSW and Southern QLD.
QLD:
Gold Coast (from Coolangatta to Southport), Nerang and Hinterland (Beaudesert) and out West (Warwick, Stanthorpe, Killarney)
NSW:
Northern NSW (Tweed Heads to Yamba, including Evans Head, Byron Bay and Ballina); the Far North Coast Hinterland (Grafton via Lismore to Murwillumbah) and out West (Casino to Tenterfield, including Drake and Tabulam, as well as Woodenbong and Bonalbo)
For larger system we also go up to Brisbane or down to Coffs Harbour and even Glen Innes. Other places by arrangement.