Regulator Accessories for Sale

We sell monitors, alarms, heating elements, sensors, shunts, cables and adaptors for our range of regulators / charge controllers.

Sort by:
Results:  1  2  >> 
Diode 6A
6 Amp Diode - Catch Diode - Flyback Diode - Freewheeling Diode6 amp catch diode, also know as a flyback diode, is used to suppress voltage spikes caused by turning off an inductive device.[DIO-001]
[DIO-001]
334 in stock
 
Low Battery Alarm for Plasmatronics Regulator
$15.40
Low Battery Alarm for Plasmatronics PL RegulatorsAlarm for Plasmatronics PL regulator (PL20, PL40 or PL60). The Buzzer will sound whenever the battery voltage goes below a preset value.[REG-050]
[REG-050]
13 in stock
 
Heating Element 1.5 Ohms 2" BSP Thread
$220.00
Shunt Load Heating Element - 1.5 Ohms - 2" BSP ThreadA water immersion heater element with standard 2 inch parallel BSP thread. Approximately 500mm long with two metre insulated leads.[RGX-E15]
[RGX-E15]
6 in stock
 
Heating Element 60V 40A 1.5 Ohms 2400W Square Plate mounting
$220.00
Shunt Load Heating Element - 1.5 Ohms - Square Plate mountingA water immersion heater element with standard square plate mounting. Approximately 260mm. Suitable for 48 Volt system.[RGX-E16]
[RGX-E16]
Special Order
 
PLS2 External Shunt Adapter
$160.00
External Shunt Adapter "PLS2"The PLS is a shunt adapter that interfaces with the PL Regulator hence monitoring everything going in and out of the battery bank.[RGX-P01]
[RGX-P01]
Special Order
 
PLA Plasmatronics Alarm Module
$363.00
Plasmatronics Alarm Module "PLA"The PLA Alarm Module allows up to 3 Plasmatronics PL charge controllers to work together. It makes system performance data retrieval easier.[RGX-P02]
[RGX-P02]
1 in stock
 
Temperature Sensor (PLT) for PL Regulator
$29.00
Temperature Sensor for Plasmatronics PL RegulatorPlasmatronics PLTB battery temperature sensor allows the PL to compensate the charging voltage with reference to the battery temperature.[RGX-P03]
[RGX-P03]
2 in stock
 
PLM Plasmatronics Remote Monitor
$165.00
Plasmatronics Remote Monitor "PLM"The PLM remote monitor is a device which allows remote user access to a PL series charge controller/regulator.[RGX-P04]
[RGX-P04]
2 in stock
 
Dingo DSA External Shunt Adaptor
$160.00
Dingo External Shunt Adaptor "DSA"The DSA shunt adaptor for use with Plasmatronics Dingo solar regulators. It measures currents which do not go though the charge controller.[RGX-P05]
[RGX-P05]
5 in stock
 
Dingo DUSB Interface
$93.00
Dingo DUSB Computer Interface - USB 2.0The Dingo DUSB interface provides a USB interface to a PC allowing the user to download data from the controller and change settings if required.[RGX-P06]
[RGX-P06]
9 in stock
 
Plasmatronics Dingo Battery Temp Sensor DTB
$29.00
Plasmatronics Dingo Battery Temperature Sensor "DTB"Battery Temperature Sensor, with 3m cable for Plasmatronics Dingo 20/20 regulator. Lug Hole: 10mm.[RGX-P07]
[RGX-P07]
12 in stock
 
Dingo Series Remote Control
$165.00
Dingo Remote Control - Solar Batteries MonitorAccess your Plasmatronics Dingo remotely, with the wall mountable Dingo Remote Control with built-in audible alarm and display backlighting.[RGX-P08]
[RGX-P08]
4 in stock
 
PLI Serial Interface for PL Regulator
$93.00
Serial Interface "PLI" - For Plasmatronics PL RegulatorsConnect your PL regulator to a computer or modem with a standard serial cable. No electrical connection through optical coupling.[RGX-P20]
[RGX-P20]
Special Order
 
External Shunt 200A - 75mV With Base
$33.00
DC Current Shunt - 200A/75mV - External with Base200 Amp 75 mV current shunt suitable for all Plasmatronics regulator installations, with insulating base. 10mm bolts for main leads.[RGX-P200]
[RGX-P200]
108 in stock
 
Shielded WZS Cable 3m for PL60
$27.50
Shielded 3m Cable "WZS" - for PL60/PL80 Regulators3 metre shielded communication cable "WZS" for Plasmatronics PL60/PL80 regulators. Can be extended or longer cables can be supplied.[RGX-P27-03]
[RGX-P27-03]
3 in stock
 
Shielded WZS Cable 12m for PL60
$44.00
Shielded 12m Cable "WZS" - for PL60/PL80 Regulators12 metre shielded communication cable "WZS" for Plasmatronics PL60/PL80 regulators. Can also be made at specific lengths to suit.[RGX-P27-12]
[RGX-P27-12]
6 in stock
 
Shielded WYS Cable 3m for PL20/40
$27.50
Shielded Cable "WYS" - For PL20 & PL40 Regulators3 metre shielded communication cable "WYS" for Plasmatronics PL20 & PL40 regulators. Longer cables can be supplied.[RGX-P28]
[RGX-P28]
15 in stock
 
Shielded WXS Extension Cable 3m for PL regulators
$16.50
Shielded Extension Cable "WXS" - For PL RegulatorsExtend communication cables to/from Plasmatronics PL regulators with this 3 metre shielded extension cable "WXS". RJ12 male both ends.[RGX-P30]
[RGX-P30]
16 in stock
 
Solid State Relay 24V 30A DC (with heatsink)
$300.00
Solid State Relay for Plasmatronics PL - 24 Volt - 30 AmpIncrease the charging capability of your Plasmatronics PL regulator by 30 amps. Suitable for 24V battery systems.[RGX-R30-2]
[RGX-R30-2]
11 in stock
 
Solid State Relay 40A 12V DC (with heatsink)
$120.00
Solid State Relay for Plasmatronics PL - 12 Volt - 40 AmpIncrease the Charging Capability of Your Plasmatronics PL Regulator by 40 Amps. Suitable for 12 Volt battery systems only.[RGX-R41-1]
[RGX-R41-1]
5 in stock
Showing 1 to 20 (of 31 items)
Result Pages:  1  2  >> 

We install solar systems in Northern NSW and Southern QLD.


QLD:
Gold Coast (from Coolangatta to Southport), Nerang and Hinterland (Beaudesert) and out West (Warwick, Stanthorpe, Killarney)


NSW:
Northern NSW (Tweed Heads to Yamba, including Evans Head, Byron Bay and Ballina); the Far North Coast Hinterland (Grafton via Lismore to Murwillumbah) and out West (Casino to Tenterfield, including Drake and Tabulam, as well as Woodenbong and Bonalbo)

For larger system we also go up to Brisbane or down to Coffs Harbour and even Glen Innes. Other places by arrangement.