Regulator Accessories for Sale

We sell monitors, alarms, heating elements, sensors, shunts, cables and adaptors for our range of regulators / charge controllers.

Sort by:
Diode 6A
6 Amp Diode - Catch Diode - Flyback Diode - Freewheeling Diode6 amp catch diode, also know as a flyback diode, is used to suppress voltage spikes caused by turning off an inductive device.[DIO-001]
[DIO-001]
299 in stock
 
Low Battery Alarm for Plasmatronics Regulator
$15.40
Low Battery Alarm for Plasmatronics PL RegulatorsAlarm for Plasmatronics PL regulator (PL20, PL40 or PL60). The Buzzer will sound whenever the battery voltage goes below a preset value.[REG-050]
[REG-050]
8 in stock
 
Heating Element 1.5 Ohms 2" BSP Thread
$220.00 
$99.00
Shunt Load Heating Element - 1.5 Ohms - 2" BSP ThreadA water immersion heater element with standard 2 inch parallel BSP thread. Approximately 500mm long with two metre insulated leads.[RGX-E15]
[RGX-E15]
6 in stock
 
PLS2 External Shunt Adapter
$160.00
External Shunt Adapter "PLS2"The PLS is a shunt adapter that interfaces with the PL Regulator hence monitoring everything going in and out of the battery bank.[RGX-P01]
[RGX-P01]
2 in stock
 
PLA Plasmatronics Alarm Module
$365.00
Plasmatronics Alarm Module "PLA"The PLA Alarm Module allows up to 3 Plasmatronics PL charge controllers to work together. It makes system performance data retrieval easier.[RGX-P02]
[RGX-P02]
Special Order
 
Temperature Sensor (PLT) for PL Regulator
$29.00
Temperature Sensor for Plasmatronics PL RegulatorPlasmatronics PLTB battery temperature sensor allows the PL to compensate the charging voltage with reference to the battery temperature.[RGX-P03]
[RGX-P03]
3 in stock
 
PLM Plasmatronics Remote Monitor
$165.00
Plasmatronics Remote Monitor "PLM"The PLM remote monitor is a device which allows remote user access to a PL series charge controller/regulator.[RGX-P04]
[RGX-P04]
Special Order
 
Dingo DSA External Shunt Adaptor
$161.70
Dingo External Shunt Adaptor "DSA"The DSA shunt adaptor for use with Plasmatronics Dingo solar regulators. It measures currents which do not go though the charge controller.[RGX-P05]
[RGX-P05]
3 in stock
 
Dingo DUSB Interface
$93.00 
$75.00
Dingo DUSB Computer Interface - USB 2.0The Dingo DUSB interface provides a USB interface to a PC allowing the user to download data from the controller and change settings if required.[RGX-P06]
[RGX-P06]
7 in stock
 
Plasmatronics Dingo Battery Temp Sensor DTB
$29.00 
$25.00
Plasmatronics Dingo Battery Temperature Sensor "DTB"Battery Temperature Sensor, with 3m cable for Plasmatronics Dingo 20/20 regulator. Lug Hole: 10mm.[RGX-P07]
[RGX-P07]
12 in stock
 
Dingo Series Remote Control
$165.00 
$125.00
Dingo Remote Control - Solar Batteries MonitorAccess your Plasmatronics Dingo remotely, with the wall mountable Dingo Remote Control with built-in audible alarm and display backlighting.[RGX-P08]
[RGX-P08]
2 in stock
 
PLI Serial Interface for PL Regulator
$93.00
Serial Interface "PLI" - For Plasmatronics PL RegulatorsConnect your PL regulator to a computer or modem with a standard serial cable. No electrical connection through optical coupling.[RGX-P20]
[RGX-P20]
1 in stock
 
External Shunt 200A - 75mV With Base
$33.00
DC Current Shunt - 200A/75mV - External with Base200 Amp 75 mV current shunt suitable for all Plasmatronics regulator installations, with insulating base. 10mm bolts for main leads.[RGX-P200]
[RGX-P200]
88 in stock
 
Shielded WZS Cable 3m for PL60
$27.50
Shielded 3m Cable "WZS" - for PL60/PL80 Regulators3 metre shielded communication cable "WZS" for Plasmatronics PL60/PL80 regulators. Can be extended or longer cables can be supplied.[RGX-P27-03]
[RGX-P27-03]
5 in stock
 
Shielded WZS Cable 12m for PL60
$39.00
Shielded 12m Cable "WZS" - for PL60/PL80 Regulators12 metre shielded communication cable "WZS" for Plasmatronics PL60/PL80 regulators. Can also be made at specific lengths to suit.[RGX-P27-12]
[RGX-P27-12]
1 in stock
 
Shielded WYS Cable 3m for PL20/40
$27.50
Shielded Cable "WYS" - For PL20 & PL40 Regulators3 metre shielded communication cable "WYS" for Plasmatronics PL20 & PL40 regulators. Longer cables can be supplied.[RGX-P28]
[RGX-P28]
7 in stock
 
Shielded WXS Extension Cable 3m for PL regulators
$16.50
Shielded Extension Cable "WXS" - For PL RegulatorsExtend communication cables to/from Plasmatronics PL regulators with this 3 metre shielded extension cable "WXS". RJ12 male both ends.[RGX-P30]
[RGX-P30]
9 in stock
 
Solid State Relay 24V 30A DC (with heatsink)
$300.00 
$200.00
Solid State Relay for Plasmatronics PL - 24 Volt - 30 AmpIncrease the charging capability of your Plasmatronics PL regulator by 30 amps. Suitable for 24V battery systems.[RGX-R30-2]
[RGX-R30-2]
10 in stock
 
Solid State Relay 40A 12V DC (with heatsink)
$120.00 
$78.00
Solid State Relay for Plasmatronics PL - 12 Volt - 40 AmpIncrease the Charging Capability of Your Plasmatronics PL Regulator by 40 Amps. Suitable for 12 Volt battery systems only.[RGX-R41-1]
[RGX-R41-1]
3 in stock
 
Remote Panel for Blue Solar 12/24V 20A Regulators
$65.00
Remote Panel for Victron BlueSolar 12/24V 20A RegulatorsWall mountable remote display for monitoring / configuration of Victron Energy BlueSolar charge controllers. Large LCD display.[RGX-V01]
[RGX-V01]
1 in stock
 
Victron Color Control GX CCGX Interface
$839.00 
$740.00
Victron Color Control GX - Remote System MonitoringThe Color Control GX provides intuitive control and monitoring and forwards data to VRM online portal website.[RGX-V100]
[RGX-V100]
8 in stock
 
Victron Venus GX Interface
$479.00
Victron Venus GX - Remote System MonitoringThe Venus GX provides intuitive control and monitoring, and forwards data to VRM online portal website.[RGX-V101]
[RGX-V101]
6 in stock
 
Victron CCGX WiFi Module Long Range
$92.00
Wi-Fi Module for Victron Color Control GX (USB)Long range USB Wi-Fi dongle requires firmware v1.16 or higher on the Victron Color Control GX monitor.[RGX-V105]
[RGX-V105]
4 in stock
 
Wall Mounted Enclosure For Victron Color Control
$64.00
Wall Mounted Enclosure - Victron Color Control GXDisplay enclosure (rectangular panel) for Victron Color Control GX or VE.Net Blue Power Panel GX. Dimensions (mm): 163(H) x 135(W) x 72(D)[RGX-V106]
[RGX-V106]
8 in stock
 
Victron USB Interface .9m
$52.27
Victron VE.Direct to USB Cable - 900mmShort patch cable to connect a Victron MPPT BlueSolar regulator to a computer - required to change settings.[RGX-V111]
[RGX-V111]
4 in stock
 
Victron VE Direct Cable 0.9m
$24.00
Victron VE.Direct to VE.Direct Cable - 900mmVE.Direct cable (0.9m) for Victron protocol to transmit data between Victron devices (e.g BlueSolar MPPT regulator and BMV-700).[RGX-V113]
[RGX-V113]
9 in stock
 
Right Angle 0.9M VE Direct Cable
$24.00
Victron VE.Direct to VE.Direct Cable - 900mm - 90° PlugVE.Direct cable (0.9m) for Victron protocol to transmit data between Victron devices. Features one right angle plug.[RGX-V114]
[RGX-V114]
7 in stock
 
Cat 5e Cable 1.5M RJ45
Cat 5e Patch Cable - 1.5 metres - RJ45 PlugsHigh quality data cable with RJ45 network plugs with gold plated contacts. Supports 1000Mbps Gigabit Ethernet.[RGX-V116]
[RGX-V116]
26 in stock
 
Victron SmartSolar Pluggable Display
$80.00
Victron SmartSolar Control DisplayThe pluggable Control Display is an optional LCD screen for Victron SmartSolar Charge Controllers.[RGX-VM001]
[RGX-VM001]
4 in stock
 
Adaptor - RJ12 Joiner Female/Female
Adaptor - RJ11 Joiner - Female to FemaleRJ11 Female - Female Inline Coupler useful to extend shielded communication cables for Plasmatronics PL regulator.[WRX-017]
[WRX-017]
14 in stock
 
Adaptor - RJ12 Double  (3 x female) for PLI & PLS2
$13.20
Adaptor - RJ12 T-Coupler (3 x female) - for PLI & PLS2Modular RJ12 - 6P6C Adaptor - T-Coupler/Joiner 3 x RJ12 female. Used to connect the PLI & PLS2 to a Plasmatronics PL regulator.[WRX-019]
[WRX-019]
3 in stock
 
RJ11 Double Adapter (2 x female 1 x male) 4 pin
Adaptor - RJ11 T-Coupler (2 x female, 1 x male) - for PLI & PLS2Modular RJ11 - 6P4C Adaptor - T-Coupler/Joiner 2 x RJ11 female, 1 x RJ11 male. Connects 4 pins to 4 pins straight through.[WRX-020]
[WRX-020]
13 in stock
 
RJ12 Double Adapter (2 x female 1 x male) 6 pin
Adaptor - RJ12 T-Coupler (2 x female, 1 x male) - for PLI & PLS2Modular RJ12 - 6P6C Adaptor - T-Coupler/Joiner 2 x RJ12 female, 1 x RJ12 male. Connects 6 pins to 6 pins straight through.[WRX-020-D]
[WRX-020-D]
Special Order
Showing 1 to 33 (of 33 items)
Result Pages:  1 

We install solar systems in Northern NSW and Southern QLD.


QLD:
Gold Coast (from Coolangatta to Southport), Nerang and Hinterland (Beaudesert) and out West (Warwick, Stanthorpe, Killarney)


NSW:
Northern NSW (Tweed Heads to Yamba, including Evans Head, Byron Bay and Ballina); the Far North Coast Hinterland (Grafton via Lismore to Murwillumbah) and out West (Casino to Tenterfield, including Drake and Tabulam, as well as Woodenbong and Bonalbo)

For larger system we also go up to Brisbane or down to Coffs Harbour and even Glen Innes. Other places by arrangement.