SolarTripod - Fixed Angle Frame Kit - 4200mm
DescriptionSolar Panel Fixed Angle Frame Kit (up to 30°) for up to five 35mm panels
Corrosion resistant aluminium frame kit "SolarTripod" from Clenergy - with 2 x 4200 mm 'T'-rail, suitable to mount 5 x Trina 210W (35mm) or 4 x Trina 260/290W solar panels in a single row (portrait) to a flat roof.
Unlike traditional tilt legs the SolarTripods are pre-assembled on the ground. The resulting permanent angle brackets are then fixed to the roof (or any other flat surface) which reduces installation time significantly.
Warning: This frame was compiled for installation in Australian wind zones A or B, for a roof not higher than 10 metres, where panels do not come close to the edges or ridge of the roof.
Please read the installation instructions carefully before beginning installation (see downloads). The installer is solely responsible for correct frame configuration and installation.
2 x 4200mm 'T'-rails
4 x 35mm end clamps (suits our Trina panels)
8 x 35mm mid clamps
3 x 30° single row tripod assembly
12 x 'T'-rail clamps
10 x earth washers
20 x stainless steel cable clips
Weight: 22 Kilograms
- 1: Clenergy EzRack Tripod Installation Guide (1011kB)