Switchmode Voltage Reducer - 24V to 12V - 25 AmpProduct discontinued
DescriptionInterVOLT Generation II Maxi Series - 25A
High end 24V DC-12V DC voltage converter that delivers 25 Amp continuous current for arduous environments. InterVOLT GEN II Switchmode Voltage Converters (SVC) are designed for high demand power requirements in both vessel and vehicle applications. They are suitable for powering a large range of auxiliary 12V DC equipment including communications, navigation, monitoring, instrumentation, lighting, refrigeration and much more.
With digital over analogue control the GEN II SVC offers previously unheard of performance and a myriad of features to assist the installer and user.
1.Separate controlled output for 12V battery charging (13.7V 2 stage)
2.High resolution voltage output of less than 0.5% under any load
3.Peak efficiency of 94% (no less than 90% under any load)
4.Remote operator control to turn unit on/off with signal current only
5.Separate 100mA 13.8V output for use when remote is off
6.Multifunction alarm output for fault and pre-emptive warnings
7.Temperature and speed controlled internal cooling fan (hydro bearing)
8.Compact design and can be mounted vertically or horizontally
9.Heavy duty termination with separate, removable terminal cover
10.3 Years warranty (subject to specific terms and conditions)
11.High quality assembly featuring marine grade hardware
12.Conformally coated printed circuit board assembly (tropicalisation)
The operator interface allows the user to control and monitor items such as voltage output and actual current load. The unit features pre-emptive alarms to warn of impending shutdown which can also be monitored remotely. Multi-stage fan cooling enables the unit to run in the hottest of environments and it can now be mounted in any position as it no longer relies on convective cooling. It can also be remotely isolated at the flick of a switch and a separate, independent output provides a constant low power supply for items such as security systems.
The specific functions of the operator interface are as follows:
1.Selectable voltage output from 12.0V to 14.0V in 0.5V increments.
2.A separate 2 stage battery charging function can be selected for automatic charging of an auxiliary 12V battery.
3.Output load indicator displays the percentage load (including overload) in a bar graph format for easy viewing.
4.Pre-emptive alarms for various fault conditions such as over load, over temperature, low input voltage and low output voltage (battery charging mode only).
5.Shutdown with alarm output for certain fault conditions such as overload, over temperature, low input voltage, fan failure and short circuit of output.
6.Reset of factory defaults
Weight: 0.9 Kilograms