Victron "BlueSolar" PWM Pro Regulator - 20 Amp



Victron Energy


20A Charge Controller - Victron Energy

12 Volt or 24 Volt (auto select).

This regulator uses Pulse Width Modulation (PWM) charge voltage control combined with a multistage charge control algorithm. The BlueSolar PWM-Pro series is ready for use with its default settings.
It also is fully programmable with help of a computer and software (available free of charge from Victron Energy website).

- Lighting control function, fully programmable.
- Three stage battery charging (bulk, absorption, float), fully programmable.
- Integrated battery monitor function (Remote Panel needed to display state of charge).
- Load output with low voltage disconnect and manual control (default setting).
- Optional external temperature sensor.
- Load output protected against over load and short circuit.
- Protected against reverse polarity connection of the solar array and/or battery.

Weight: 0.38 Kilograms
Warranty: 5yrs
Code: REG-V20
Price: $127.00


Victron "BlueSolar" PWM Pro Regulator - 20 Amp
Nominal system voltage12V or 24V (auto detect)
Rated charge current20A
Max solar voltage
@ 12V28V
@ 24V55V
Load disconnect
@ 12V11.1V
@ 24V22.2V
Load reconnect
@ 12V12.6V
@ 24V25.2V
Self consumption< 10mA
Protection classIP30
Operating temperature range-20 to +50°C
Dimensions (mm)160(W) x 82(H) x 48(D)
ModelBlueSolar PWM Pro 20A


Related Products

No related products.

We install solar systems in Northern NSW and Southern QLD.

Gold Coast (from Coolangatta to Southport), Nerang and Hinterland (Beaudesert) and out West (Warwick, Stanthorpe, Killarney)

Northern NSW (Tweed Heads to Yamba, including Evans Head, Byron Bay and Ballina); the Far North Coast Hinterland (Grafton via Lismore to Murwillumbah) and out West (Casino to Tenterfield, including Drake and Tabulam, as well as Woodenbong and Bonalbo)

For larger system we also go up to Brisbane or down to Coffs Harbour and even Glen Innes. Other places by arrangement.