Victron MultiPlus - 2400 Watt Inverter/Charger - 24 Volt
DescriptionVictron Compact MultiPlus C24/3000/70-50
24 volt inverter/charger with 2400W continuous power output (6000W surge) and 70A charge capacity and 50A automatic transfer switch (UPS function) - dual battery bank capable.
The MultiPlus is a powerful true sine wave inverter, a sophisticated battery charger that features adaptive charge technology, and a high-speed AC transfer switch in a single compact enclosure. Beside these primary functions, however, the Multi has several advanced features that provide a range of new applications as outlined below.
Two AC Outputs
The main output has no-break functionality. The MultiPlus takes over the supply to the connected loads in the event of a grid failure or when shore/generator power is disconnected. This happens so fast (less than 20 milliseconds) that computers and other electronic equipment will continue to operate without disruption. The maximum current of the transfer switch is 50A.
The second output is live only when AC is available on one of the inputs of the MultiPlus. Loads that should not discharge the battery, like a water heater for example, can be connected to this output. The second output is limited to 16A.
Virtually unlimited power thanks to parallel operation
Up to 6 Multis can operate in parallel to achieve higher power output. Six 24/3000/70 units, for example, provide 15 kW / 18 kVA output power with 420 Amps of charging capacity.
Three phase capability
In addition to parallel connection, three units of the same model can be configured for three-phase output. But that's not all: up to 6 sets of three units can be parallel connected for a huge 45 kW / 54 kVA inverter and 1260 A charger!
PowerControl - Dealing with limited generator or shore side / grid power
The Multi is a very powerful battery charger. It will therefore draw a lot of current from the generator or shore side supply (nearly 10 A per Multi at 230 VAC). With the Multi Control Panel a maximum generator or shore current can be set. The MultiPlus will then take account of other AC loads and use whatever is extra for charging, thus preventing the generator or shore supply from being overloaded.
PowerAssist - Boosting the capacity of shore or generator power
This feature takes the principle of PowerControl to a further dimension. It allows the MultiPlus to supplement the capacity of the alternative source. Where peak power is so often required only for a limited period, the MultiPlus will make sure that insufficient shore or generator power is immediately compensated for by power from the battery. When the load reduces, the spare power is used to recharge the battery.
Four stage adaptive charger and dual bank battery charging
The main output provides a powerful charge to the battery system by means of advanced 'adaptive charge' software. The software fine-tunes the three stage automatic process to suit the condition of the battery, and adds a forth stage for long periods of float charging.
Weight: 22 Kilograms
|Victron MultiPlus - 2400 Watt Inverter/Charger - 24 Volt|
|Input voltage range||19-33V DC|
|Continuous output power (@ 25°C)||2400W|
|Input voltage range||187-265V AC|
|Charge voltage aborption mode||28.8V DC|
|Charge voltage float mode||27.6V DC|
|Storage mode||26.4V DC|
|Max. charge current||70A|
|Max. charge current 2nd battery bank||4A|
|Battery connection||4 x M8 bolts|
|230V AC connection||Screw terminals 13mm² (6 AWG)|
|Dimensions (mm)||362(H) x 258(W) x 218(D)|
|Colour||blue RAL 5012|
- 1: Victron Multiplus Datasheet (324kB)
- 2: Victron Multiplus 3000 Manual (1958kB)
- 3: Victron Energy Unlimited (638kB)
- 4: Victron Multiplus FAQ Not Accepting Generator Power (64kB)