Products
My Account
Share this page
Victron Skylla Battery Charger - 48 Volt - 50 Amp
VICTRON Skylla 48V 50A - also know as TITAN.
3 Stage Automatic Charger - comes pre-fitted with 1.5m of 7.9mm battery leads with 8mm lugs. AC side must be hard wired.
Perfect chargers for any type of battery.
Charge voltage can be precisely adjusted to suit any sealed or unsealed battery system. In particular, sealed maintenance free batteries must be charged correctly in order to ensure a long service life. Overvoltage will result in excessive gassing and venting of a sealed battery. The battery will dry out and fail.
Controlled charging
Every TG charger has a microprocessor, which accurately controls the charging in three steps. The charging process takes place in accordance with the IUoUo characteristic and charges more rapidly than other processes.
Use of TG chargers as a power supply
As a result of the perfectly stabilised output voltage, a TG charger can be used as a power supply if batteries or large buffer capacitors are not available.
Two outputs to charge 2 battery banks
The TG chargers feature 2 isolated outputs. The second output, limited to approximately 4 A and with a up a starter battery.
To increase battery life:
temperature compensation Every Skylla TG charger comes with a battery temperature sensor. When connected, charge voltage will automatically decrease with increasing battery temperature. This feature is especially recommended for sealed batteries which otherwise might be overcharged and dry out due to venting.
Battery voltage sense
In order to compensate for voltage loss due to cable resistance, TG chargers are provided with a voltage sense facility so that the battery always receives the correct charge voltage.
Input voltage (V AC) 230
Input voltage range (V AC) 185-264
Input voltage range (V DC) 180-400
Frequency (Hz) 45-65
Power factor 1
Charge voltage 'absorption' (V DC) 57
Charge voltage 'float' (V DC) 53
Charge current house batt. (A) (2) 50
Charge current starter batt. (A) n.a
Charge characteristic IUoUo (three step)
Battery capacity (Ah) 250-500
Weight: 10 Kilograms
Warranty: 2yr
Code: BCH-VS4850
Price: $2710.00
3 Stage Automatic Charger - comes pre-fitted with 1.5m of 7.9mm battery leads with 8mm lugs. AC side must be hard wired.
Perfect chargers for any type of battery.
Charge voltage can be precisely adjusted to suit any sealed or unsealed battery system. In particular, sealed maintenance free batteries must be charged correctly in order to ensure a long service life. Overvoltage will result in excessive gassing and venting of a sealed battery. The battery will dry out and fail.
Controlled charging
Every TG charger has a microprocessor, which accurately controls the charging in three steps. The charging process takes place in accordance with the IUoUo characteristic and charges more rapidly than other processes.
Use of TG chargers as a power supply
As a result of the perfectly stabilised output voltage, a TG charger can be used as a power supply if batteries or large buffer capacitors are not available.
Two outputs to charge 2 battery banks
The TG chargers feature 2 isolated outputs. The second output, limited to approximately 4 A and with a up a starter battery.
To increase battery life:
temperature compensation Every Skylla TG charger comes with a battery temperature sensor. When connected, charge voltage will automatically decrease with increasing battery temperature. This feature is especially recommended for sealed batteries which otherwise might be overcharged and dry out due to venting.
Battery voltage sense
In order to compensate for voltage loss due to cable resistance, TG chargers are provided with a voltage sense facility so that the battery always receives the correct charge voltage.
Input voltage (V AC) 230
Input voltage range (V AC) 185-264
Input voltage range (V DC) 180-400
Frequency (Hz) 45-65
Power factor 1
Charge voltage 'absorption' (V DC) 57
Charge voltage 'float' (V DC) 53
Charge current house batt. (A) (2) 50
Charge current starter batt. (A) n.a
Charge characteristic IUoUo (three step)
Battery capacity (Ah) 250-500
Weight: 10 Kilograms
Warranty: 2yr
Code: BCH-VS4850
Price: $2710.00
- 1: Victron Skylla Charger 24-48V Datasheet (269Kb)
- 2: Victron Skylla Charger 24-48V Dimensions (17Kb)
- 3: Victron Skylla 24V80-100 Titan 48V50 (598Kb)
We install solar systems in Northern NSW and Southern QLD.
QLD:
Gold Coast (from Coolangatta to Southport), Nerang and Hinterland (Beaudesert) and out West (Warwick, Stanthorpe, Killarney)
NSW:
Northern NSW (Tweed Heads to Yamba, including Evans Head, Byron Bay and Ballina); the Far North Coast Hinterland (Grafton via Lismore to Murwillumbah) and out West (Casino to Tenterfield, including Drake and Tabulam, as well as Woodenbong and Bonalbo)
For larger system we also go up to Brisbane or down to Coffs Harbour and even Glen Innes. Other places by arrangement.