Victron Skylla Battery Charger - 24 Volt - 50 Amp



Victron Energy


VICTRON Skylla TG - 24V 50A

3-stage automatic 24 volt battery charger and dual output to charge two battery banks. One output is fully rated (50 Amps), recommended for batteries of 250-500Ah capacity, and one output is limited to 4 Amps (e.g. for starter battery). Ideal for 24V motor homes or trucks.

The input for the charger is 230V AC or 180-400V DC.

The charge voltage can be precisely adjusted to suit any battery system. It can also be measured directly on the battery terminals in order to compensate for voltage loss due to cable resistance. An external sensor allows to measure battery temperature and compensate charge voltage accordingly. Have a look at the Skylla TG Series for a detailed description or download the spec sheet in downloads tab.

Comes pre-fitted with 1.5m of 13mm² battery leads with 8mm lugs and 2m AC lead with 3pin 10A plug.

Weight: 5.5 Kilograms
Warranty: 5yrs
Code: BCH-VS2450
Price: $1398.00


Victron Skylla Battery Charger - 24 Volt - 50 Amp
Battery voltage24V
Input voltage AC185 - 264V AC
Input voltage DC180 - 400V DC
Input AC frequency45 - 65Hz
Power factor1
Charge voltage "absorption"28.5V DC
Charge voltage "float"26.5V DC
Charge current50A
Charge characteristicIUoUo (three stage charging)
Protection classIP21
Operating temperature range-20 to +60°C
Dimensions (mm)365(H) x 250(W) x 147(D)

More Specs

Related Products

No related products.

We install solar systems in Northern NSW and Southern QLD.

Gold Coast (from Coolangatta to Southport), Nerang and Hinterland (Beaudesert) and out West (Warwick, Stanthorpe, Killarney)

Northern NSW (Tweed Heads to Yamba, including Evans Head, Byron Bay and Ballina); the Far North Coast Hinterland (Grafton via Lismore to Murwillumbah) and out West (Casino to Tenterfield, including Drake and Tabulam, as well as Woodenbong and Bonalbo)

For larger system we also go up to Brisbane or down to Coffs Harbour and even Glen Innes. Other places by arrangement.