Victron Skylla Battery Charger - 48 Volt - 25 Amp



Victron Energy


VICTRON Skylla 48V 25A - also known as TITAN.

3-stage automatic 48 volt battery charger with a 25 Amp rated output recommended for batteries of 125 - 250Ah capacity.

The input for the charger is 230V AC or 180-400V DC.

The charge voltage can be precisely adjusted to suit any battery system. It can also be measured directly on the battery terminals in order to compensate for voltage loss due to cable resistance. An external sensor allows to measure battery temperature and compensate charge voltage accordingly. Have a look at the Skylla TG Series for a detailed description or download the spec sheet in downloads tab.

Comes pre-fitted with 1.5m of 7.9mm² battery leads with 8mm lugs and 2m AC lead with 3pin 10A plug.

Weight: 5.5 Kilograms
Warranty: 5yrs
Code: BCH-VS4825
Price: $1475.00


Victron Skylla Battery Charger - 48 Volt - 25 Amp
Battery voltage48V
Input voltage AC185 - 264V AC
Input voltage DC180 - 400V DC
Input AC frequency45 - 65Hz
Power factor1
Charge voltage "absorption"57V DC
Charge voltage "float"53V DC
Charge current25A
Charge characteristicIUoUo (three stage charging)
Protection classIP21
Operating temperature range-20 to +60°C
Dimensios (mm)365(H) x250(W) x147(D)

More Specs

Related Products

No related products.

We install solar systems in Northern NSW and Southern QLD.

Gold Coast (from Coolangatta to Southport), Nerang and Hinterland (Beaudesert) and out West (Warwick, Stanthorpe, Killarney)

Northern NSW (Tweed Heads to Yamba, including Evans Head, Byron Bay and Ballina); the Far North Coast Hinterland (Grafton via Lismore to Murwillumbah) and out West (Casino to Tenterfield, including Drake and Tabulam, as well as Woodenbong and Bonalbo)

For larger system we also go up to Brisbane or down to Coffs Harbour and even Glen Innes. Other places by arrangement.