My Account
My Shopping Cart
Share this page
Winch Tilt Tower for Wind Turbines - 19.5 metres - Soma
Galvanised 19.5m Winch-Tilt Tower Kit (excl. pipes)
The finished tower consists of 3 x 6.5 metre lengths of galvanised pipe (NOT included) supported by guy wires. The wind turbine can be assembled on the ground and then easily raised with this hinged tower. Total ground area: 13.8m x 13.8m.
Generally 3 lengths of pipe (NOT included) are used to provide a 19.5 metre tower. The tower requires concrete foundations and it pivots at the base to enable it to be raised and lowered for ease of installation and maintenance of the wind generator. A jockey pole or gin pole is used for leverage to raise the tower and a winch is secured to one of the guy wire foundations to winch the tower up and down.
The tower kit excludes the actual poles/pipes. Poles required are:
3 x 80mm NB 6.5m med. wall gal tube
1 x 65mm NB 6.5m med. wall gal tube
Specs:
Height (when finished): 19.5m
Base dimensions (m): 13.8 x 13.8
Outside foundations (m): 0.7 x 0.7 x 0.7
Centre foundation (m): 1 x 1 x 0.25(deep)
Comprehensive instructions are included in the manual.
Features
- tower tilts down to the ground
- bi-directional brake winch
- hot dip galvanised
- supplied as kit without poles
Benefits
- no climbing
- no towing
- safe
- anti-corrosion
- simple installation and maintenance
Weight: 63 Kilograms
Code: WIN-K19
Price: $3560.00 Winch Tilt Tower for Wind Turbines - 19.5 metres - Soma Soma 19.5m Tower Kit Less Pipe
The finished tower consists of 3 x 6.5 metre lengths of galvanised pipe (NOT included) supported by guy wires. The wind turbine can be assembled on the ground and then easily raised with this hinged tower. Total ground area: 13.8m x 13.8m.
Generally 3 lengths of pipe (NOT included) are used to provide a 19.5 metre tower. The tower requires concrete foundations and it pivots at the base to enable it to be raised and lowered for ease of installation and maintenance of the wind generator. A jockey pole or gin pole is used for leverage to raise the tower and a winch is secured to one of the guy wire foundations to winch the tower up and down.
The tower kit excludes the actual poles/pipes. Poles required are:
3 x 80mm NB 6.5m med. wall gal tube
1 x 65mm NB 6.5m med. wall gal tube
Specs:
Height (when finished): 19.5m
Base dimensions (m): 13.8 x 13.8
Outside foundations (m): 0.7 x 0.7 x 0.7
Centre foundation (m): 1 x 1 x 0.25(deep)
Comprehensive instructions are included in the manual.
Features
- tower tilts down to the ground
- bi-directional brake winch
- hot dip galvanised
- supplied as kit without poles
Benefits
- no climbing
- no towing
- safe
- anti-corrosion
- simple installation and maintenance
Weight: 63 Kilograms
Code: WIN-K19
Price: $3560.00 Winch Tilt Tower for Wind Turbines - 19.5 metres - Soma Soma 19.5m Tower Kit Less Pipe
- 1: Soma Guyed Tilt Tower (48Kb)
- 2: Soma 19m Tower Installation Manual (575Kb)
Close
QLD:
Gold Coast (from Coolangatta to Southport), Nerang and Hinterland (Beaudesert) and out West (Warwick, Stanthorpe, Killarney)
NSW:
Northern NSW (Tweed Heads to Yamba, including Evans Head, Byron Bay and Ballina); the Far North Coast Hinterland (Grafton via Lismore to Murwillumbah) and out West (Casino to Tenterfield, including Drake and Tabulam, as well as Woodenbong and Bonalbo)
For larger system we also go up to Brisbane or down to Coffs Harbour and even Glen Innes. Other places by arrangement.
We install solar systems in Northern NSW and Southern QLD.
QLD:
Gold Coast (from Coolangatta to Southport), Nerang and Hinterland (Beaudesert) and out West (Warwick, Stanthorpe, Killarney)
NSW:
Northern NSW (Tweed Heads to Yamba, including Evans Head, Byron Bay and Ballina); the Far North Coast Hinterland (Grafton via Lismore to Murwillumbah) and out West (Casino to Tenterfield, including Drake and Tabulam, as well as Woodenbong and Bonalbo)
For larger system we also go up to Brisbane or down to Coffs Harbour and even Glen Innes. Other places by arrangement.