Components of Solar Public Lighting Installations

All Pecan Public Area Lighting Systems are designed and constructed to the relevant Australian Standards, from materials that will withstand the harshest of environments. All fixing hardware is either anodised aluminium or stainless steel.

Luminaire

LED Roadway Lighting Luminaire and Logo

Pecan Public Lighting systems use Satelliteā„¢ fixtures from LED Roadway Lighting - manufacturer of advanced energy efficient lighting technologies. The fixtures come with 24 LEDs or 48 LEDs with a miniscule power consumption of 22 Watt (or 43 Watt respectively). Light output is 96 Lumen per Watt.

The Satellite fixture includes

  • a patented fin based thermal management system
  • state-of-the-art optics with reflectors
  • sturdy poly-carbonate cover
  • high performance LEDs with an even 5000 K colour temperature

Watch a promotional video about this environmentally friendly fixture.

Pole and Solar Frame

Pecan Street Light Pole and Solar Frame

The standard poles are 6 metres long and are certified to current Australian wind loading standards. We can also design to meet your requirements for project quantities. Poles are also available with City logos incorporated into the light arm. The solar panel frame has a modern sleek design which being built of sheet steel provides vandal protection to the rear of the solar modules. The frames also come with bird spikes to prevent perching and subsequent excessive droppings on the panels. All components are hot dipped galvanised and are available in a wide range of tough powder coated colours to order.

Bases

rag bolt street light base
Rag Bolt

Standard, with hinge

slip base street light base
Slip Base

Roadside fitment

Above ground jetty box street light base
Jetty Box

Above ground mount

Most installations would require a rag bolt base which are suitable for parkland settings or areas not adjacent to roadways where speed limit exceeds 50km/h. To meet Australian standards for roadside fitment the Pecan Street Light can also be supplied with slip bases.

For situations were digging a hole is not possible/feasible we offer the above ground "Jetty Box" which can be bolted to concrete or Jetties. The Jetty Box adds an extra 600mm to the height of the light pole.

Solar Panels

CNPV Logo

We use small area modules (SAM) from CNPV. The solar panels come with an industry leading 10 year warranty for material defects and workmanship and a 25 year limited performance warranty. View a data sheet.

The size and number of the panels are matched to the inverter or battery (usually 12 volts). The system is optimised for the region it operates in so that the amount of energy generated over a year is balanced to the energy used in powering the light - meaning the system is energy neutral.


We install solar systems in Northern NSW and Southern QLD.


QLD:
Gold Coast (from Coolangatta to Southport), Nerang and Hinterland (Beaudesert) and out West (Warwick, Stanthorpe, Killarney)


NSW:
Northern NSW (Tweed Heads to Yamba, including Evans Head, Byron Bay and Ballina); the Far North Coast Hinterland (Grafton via Lismore to Murwillumbah) and out West (Casino to Tenterfield, including Drake and Tabulam, as well as Woodenbong and Bonalbo)

For larger system we also go up to Brisbane or down to Coffs Harbour and even Glen Innes. Other places by arrangement.