Dingo Board - Pre-Wired Solar Regulator

Product discontinued


Pre-wired 40A Distribution Board

The Dingo Board is the big brother of our 20A Solar Board. Like the 20A version, this board is designed to allow budget conscious customers a safe and easy method of installing their solar system. To make it a fully operational solar system you have to add one or more 12/24V solar panel(s) - ideally with corresponding MC connectors - and a suitable deep cycle battery (120 - 600Ah). Please consult the Dingo Board calculator to complete this system. RPC also recommends the use of a suitably designed battery box.

This board can monitor up to a 40 Amp Load via the internal load terminal of the Dingo regulator. If data monitoring of loads greater than 40 Amps is required RPC recommends upgrading to the REG-L00 to cater for the addition of a shunt.

The Board is pre-wired with a switch board containing 8 circuit breakers:
2 x 50A, 1 x 40 A, 3 x 20 A, 1 x 6A, 1 x 2A

The components of this package are:
- 40A Plasmatronics Dingo solar charge controller
- 8 pole distribution box with breakers
- internal cabling
- wooden mounting panel
- shutdown procedure sign
- 1.5 m 13mm battery leads
- 50 amp Anderson Plug
- 20 amp cig socket
- 6 amp Hub 5

Board Dimensions (mm): 320 (H) x 520 (W) x 120 (D)

Weight: 4.2 Kilograms


Related Products

No related products.

We install solar systems in Northern NSW and Southern QLD.

Gold Coast (from Coolangatta to Southport), Nerang and Hinterland (Beaudesert) and out West (Warwick, Stanthorpe, Killarney)

Northern NSW (Tweed Heads to Yamba, including Evans Head, Byron Bay and Ballina); the Far North Coast Hinterland (Grafton via Lismore to Murwillumbah) and out West (Casino to Tenterfield, including Drake and Tabulam, as well as Woodenbong and Bonalbo)

For larger system we also go up to Brisbane or down to Coffs Harbour and even Glen Innes. Other places by arrangement.