Dingo External Shunt Adaptor "DSA"Product discontinued
DescriptionDingo Shunt Adaptor DSA
The DSA shunt adaptor is designed for use with Plasmatronics Dingo solar regulators. It allows the controller to measure charge or load currents which do not go though the controller. This allows inverter or generator currents to be included in the controller's display. The Amp hour reading and State-of-Charge screen will not be meaningful unless all the currents in the system are accounted for.
The DSA shunt adaptor measures the current in a current shunt and converts that measurement into a digital form. This data is then sent to the Dingo controller. On the Dingo screen, the current read by the adaptor is added to the internal current. Each adaptor current can also be seen separately by a long push on CHRG or LOAD.
The DSA shunt adaptor is bi-directional. It can report net load current or net charge current from a single shunt. A load/charge setting is not required. Up to four DSAs can be used together in one system.
Range: +/- 255A in 0.1A steps
Accuracy: +/-1% or 1 digit
Shunt Sizes: 1mΩ, 0.5mΩ and 0.375mΩ
DC Isolation: 500V
Temperature: -20 to +70°C
Supply Current: 4.3mA (from Dingo supply)
Weight: 0.2 Kilograms
- 1: DSA Dingo External Shunt Adaptor (552kB)