Sign/Label Kit - Grid Connect Solar




Durable Sign/Label Kit

Contains 10 labels, 1 sticker & one shut-down procedure to meet Essential Energy/Clean Energy Council guidelines. (Refer to AS4777.1 Appendix A, AS5033 and NSW Service & installation Rules Chapter 8)

1 x Shutdown Procedure
1 x Solar Supply Main Switch
1 x Normal Supply Main Switch
1 x Solar Array On Roof
1 x Warning Solar Generation Plant Connected
1 x AC Isolator
1 x Reflective PV Sticker
1 x Warning Multiple DC Sources (yellow, not pictured)
1 x Warning PV Isolators (yellow, not pictured)
1 x Earth Fault Alarm (yellow, not pictured)
1 x Demand Response Mode (red - not pictured)
1 x Warning Multiple Supplies (yellow, not pictured)

The signs/labels are made from exterior grade Weatherall:

A thick top layer ensures a tough, long lasting finish. Normal wear & scratching will not pass through to the sub-laminate, making the visual symptoms of age much less obvious. This material is U.V. stable, so it is ok to use in full sunlit conditions.

RPC recommends attaching with 'Sikaflex' for permanent fixing.

Weight: 0.06 Kilograms
Code: PRN-900
Price: $30.00


No downloads for this product.

Related Products

No related products.

We install solar systems in Northern NSW and Southern QLD.

Gold Coast (from Coolangatta to Southport), Nerang and Hinterland (Beaudesert) and out West (Warwick, Stanthorpe, Killarney)

Northern NSW (Tweed Heads to Yamba, including Evans Head, Byron Bay and Ballina); the Far North Coast Hinterland (Grafton via Lismore to Murwillumbah) and out West (Casino to Tenterfield, including Drake and Tabulam, as well as Woodenbong and Bonalbo)

For larger system we also go up to Brisbane or down to Coffs Harbour and even Glen Innes. Other places by arrangement.