Light Fittings - E17 - E27 - B22 - G4/G5
Lamp holders, light fittings and adaptors suitable for our DC lighting range.
We currently support the following standards:
- Bayonet (B22)
- Edison Screw 27
- Edison Screw 17
- Bi-Pin G4/G5
B22 fitting is the standard fitting for 230 volt wiring in Australia, followed by E27, also known as the original Edison Screw base. Unfortunately, both fittings are also used in DC wiring. E17 and G5/G5 are only used in DC installations.
Note: E17 is slightly bigger than the E14 fitting found in 230V AC wiring to avoid accidental usage of extra low voltage globes in 230V circuits.
Sort by:
$4.40
Lamp socket Adaptor - Edison 27mm (E27) to 17mm (E17)This adaptor modifies any Edison 27mm (E27) lamp socket to 17mm (E17). Suits our Sundaya CFL bulbs.[LYF-001]
[LYF-001]
34 in stock
$13.00
Adapter - Bayonet Connector to Bi-Pin - BC to G4/GU5.3/G6.35Bayonet Connector (BC) to Bi-Pin Adapter (G4/GU5.3/GY6.35) for Halogen/LED bulbs or fluorescent tubes. For extra low voltage globes only.[LYF-002]
[LYF-002]
8 in stock
$11.00
Male Bayonet Connector AdapterBayonet Connector (BC) Adapter by Clipsal. Male BC to open end. Convert your lamp holder into something more versatile. Max load: 3A 250V AC.[LYF-004]
[LYF-004]
40 in stock
$30.00
Batten Lamp Holder, Edison 27mmAustralian made, high quality batten lampholder with 27mm Edison screw (E27) fitting. Colour: white.[LYF-010]
[LYF-010]
21 in stock
$22.00
Pendant Lamp Holder - Edison 27mmAustralian made, high quality pendant lampholder with 27mm Edison screw (E27) fitting. Colour: white.[LYF-011]
[LYF-011]
36 in stock
$7.70
Batten Lamp Holder, Bayonet ConnectorHigh quality batten lamp holder from Clipsal. Base diameter: 67mm; Fitting type: Bayonet Connector (BC); Colour: white;[LYF-012]
[LYF-012]
10 in stock
$6.50
Pendant Lamp Holder - Bayonet Connector - ClipsalPendant lampholder with Bayonet fitting from Clipsal. Comes with ring to attach a standard lamp shade.[LYF-013]
[LYF-013]
25 in stock
$3.30
Ceramic Socket 2 Pin G4 (for Halogens)Halogen Bi-Pin Ceramic Light Fitting, with leads. The socket is 15mm wide and the leads are 100 mm long. For 12V or 24V light bulbs.[LYF-014]
[LYF-014]
210 in stock
$11.00
Batten Lamp Holder with Pull Switch for 12V/24VBatten lampholder with pull-cord switch for 12V or 24V lights. Base diameter: 117mm, fitting type: E27, colour: white.[LYF-300]
[LYF-300]
548 in stock
$7.70
Pendant Lamp Holder - 180cm Extender - Edison 17mm1800mm E17 male to female extender cable with pendant lampholder socket. Also available in 1200mm.[SUN-AC139]
[SUN-AC139]
1 in stock
$6.60
Pendant Lamp Holder - 120cm Extender - Edison 17mm1200mm E17 male to female extender cable with pendant lampholder socket. Also available in 1800mm.[SUN-AC140]
[SUN-AC140]
31 in stock
$8.00
Pendant Lamp Holder "Pullite" with Integrated Pull SwitchThis lampholder has a built-in light switch. Turn it on and off by pulling the suspended light fitting (E17 socket). For extra low voltage DC systems only.[SUN-AC141]
[SUN-AC141]
5 in stock
$2.50
Batten lamp holder "Apollo" - Edison 17mmBatten lamp holder "Apollo" for 17mm (E17) DC light bulbs. Base diameter: 95mm; Height: 55 mm; Colour: black;[SUN-AC149]
[SUN-AC149]
2236 in stock
Showing 1 to 13 (of 13 items)
Result Pages: 1
Share this page