Victron Skylla Battery Charger - 48 Volt - 50 Amp
DescriptionVICTRON Skylla 48V 50A - also know as TITAN.
3-stage automatic 48 volt battery charger with a 50 Amp rated output recommended for batteries of 250 - 500Ah capacity.
The input for the charger is 230V AC or 180-400V DC. Unlike other Skylla TG chargers, this model needs to be hard wired (does not come with AC plug).
The charge voltage can be precisely adjusted to suit any battery system. It can also be measured directly on the battery terminals in order to compensate for voltage loss due to cable resistance. An external sensor allows to measure battery temperature and compensate charge voltage accordingly. Have a look at the Skylla TG Series for a detailed description or download the spec sheet in downloads tab.
Comes pre-fitted with 1.5m of 16mm² battery leads with 8mm lugs. AC side must be hard wired.
Weight: 10 Kilograms
|Victron Skylla Battery Charger - 48 Volt - 50 Amp|
|Input voltage AC||185 - 264V AC|
|Input voltage DC||180 - 400V DC|
|Input AC frequency||45 - 65Hz|
|Charge voltage "absorption"||57V DC|
|Charge voltage "float"||53V DC|
|Charge characteristic||IUoUo (three stage charging)|
|Operating temperature range||-20 to +60°C|
|Dimensios (mm)||365(H) x250(W) x147(D)|
- 1: Victron Skylla Charger 24-48V Datasheet (269kB)
- 2: Victron Skylla 24V80-100 Titan 48V50 Manual (598kB)
- 3: Victron Energy Warranty (121kB)
- 4: Victron Skylla Charger 24-48V Dimensions (17kB)