Enphase IQ7+ Micro Inverter - for 235-440W Modules



Enphase Energy


Enphase IQ 7+ Micro Inverter

Enphase's seventh-generation microinverters are powered by a unique software-defined architecture, offering the most efficient design with a single hardware SKU worldwide. With 96.5% EU efficiency, the IQ7 series produces more power at nearly half the weight of its predecessor.

The IQ 7 series uses the revolutionary 2-wire Q Cable which makes installations even more flexible. It also leverages semiconductor integration for higher reliability and better economies of scale.

One micro-inverter connects to one solar module (235- 440W panels). This setup eliminates the impact of the "Christmas tree light" effect if one solar module malfunctions. Individual inverters also allow you to point the panels in multiple directions (very useful on complex roofs, e.g. yurts) which could expand your solar production from "dusk till dawn".

The inverter is mounted close to its associated panel which means there is no high-DC voltage in the system, eliminating the need for long and expensive DC solar cable runs. The Enphase IQ7+ is compatible with storage systems, including battery management systems, and it integrates seamlessly with the the Enphase Envoy-S communications gateway, the Enphase Q Relay (acts as galvanic disconnection device) and Enphase Enlighten monitoring and analysis software.

If an internet connection* is available, individual panel performance is continuously monitored, and if any faults are detected the installer and home owner are notified via email.

Enphase micro-inverters are approved grid-feed inverters (with grid outage sensor) that can also be utilised in an off-grid situation.

- Optimised for high powered 60-cell and 72-cell modules
- More than a million hours of testing
- Class II double-insulated enclosure
- Complies with advanced grid support, voltage and frequency ride-through requirements
- Remotely updates to respond to changing grid requirements
- Configurable for varying grid profiles

* An internet connection is required on site to commission the system.

Weight: 1.2 Kilograms
Code: INV-EPIQ7+
Price: $234.39


Enphase IQ7+ Micro Inverter - for 235-440W Modules
Recommended input power235-440W
EU efficiency (230VAC)96.5%
Max cont. output power290VA
Peak output power295VA
Maximum units per 20A branch circuit
@ 230V AC13
Max. input DC voltage DC60V
Dimensions (mm)212(W) x 175(H) x 30.2(D)
Net weight1.08kg
Manufacturerenphase Energy


Related Products

No related products.

We install solar systems in Northern NSW and Southern QLD.

Gold Coast (from Coolangatta to Southport), Nerang and Hinterland (Beaudesert) and out West (Warwick, Stanthorpe, Killarney)

Northern NSW (Tweed Heads to Iluka, including Evans Head, Byron Bay and Ballina); the Far North Coast Hinterland (Yamba via Lismore to Murwillumbah) and out West (Casino to Tenterfield, including Drake and Tabulam, as well as Woodenbong and Bonalbo)

We also have sales agents in
Grafton:contact Andy Wilkinson directly on 0409 508 144, and
Tenterfield:contact Diamond J Legend directly on 0425 769 444.