Victron PWM Charge Controller - LCD&USB - 12/24V - 30A
Description
30A PWM Charge Controller - Victron Energy12 Volt or 24 Volt (auto select).
This regulator uses Pulse Width Modulation (PWM) charge voltage control combined with a multistage charge control algorithm and LCD display. The BlueSolar PWM regulator is ready for use with its default settings.
It also is fully programmable.
Features
- Lighting control function, fully programmable.
- Three stage battery charging (bulk, absorption, float), fully programmable.
- Integrated battery monitor function (Remote Panel needed to display state of charge).
- Load output with low voltage disconnect and manual control (default setting).
- Battery type: Lead-ACID and LiFePO4 (with internal BMS)
- Optional external temperature sensor.
- Load output protected against over load and short circuit.
- Protected against reverse polarity connection of the solar array and/or battery.
Weight: 0.33 Kilograms
Warranty: 5yrs
Code: REG-V30
Price: $115.50
Specifications
Victron PWM Charge Controller - LCD&USB - 12/24V - 30A | |
---|---|
Nominal system voltage | 12V or 24V (auto detect) |
Rated charge current | 30A |
Max solar voltage | |
@ 12V | 28V |
@ 24V | 55V |
Load disconnect | |
@ 12V | 11.2V |
@ 24V | 22.4V |
Load reconnect | |
@ 12V | 12.6V |
@ 24V | 25.2V |
Self consumption | < 10mA |
Protection class | IP20 |
Operating temperature range | -20 to +50°C |
Dimensions (mm) | 101(H) x 184(W) x 47(D) |
Model | BlueSolar PWM Charge Controller-LCD&USB 12/24V |
Manufacturer | Victron |
Downloads
- 1: Victron BlueSolar LCD USB Datasheet (225kB)
- 2: Victron BlueSolar LCD USB 30A Manual (1262kB)
- 3: Victron Energy Warranty (121kB)
- 4: Victron BlueSolar Pro Setup (1070kB)