Victron Skylla Battery Charger - 24 Volt - 50 AmpSpecial Order
DescriptionVICTRON Skylla TG - 24V 50A
3-stage automatic 24 volt battery charger and dual output to charge two battery banks. One output is fully rated (50 Amps), recommended for batteries of 250-500Ah capacity, and one output is limited to 4 Amps (e.g. for starter battery). Ideal for 24V motor homes or trucks.
The input for the charger is 230V AC or 180-400V DC.
The charge voltage can be precisely adjusted to suit any battery system. It can also be measured directly on the battery terminals in order to compensate for voltage loss due to cable resistance. An external sensor allows to measure battery temperature and compensate charge voltage accordingly. Have a look at the Skylla TG Series for a detailed description or download the spec sheet in downloads tab.
Comes pre-fitted with 1.5m of 16mm² battery leads with 8mm lugs and 2m AC lead with 3pin 10A plug.
Weight: 5.5 Kilograms
|Victron Skylla Battery Charger - 24 Volt - 50 Amp|
|Input voltage AC||185 - 264V AC|
|Input voltage DC||180 - 400V DC|
|Input AC frequency||45 - 65Hz|
|Charge voltage "absorption"||28.5V DC|
|Charge voltage "float"||26.5V DC|
|Charge characteristic||IUoUo (three stage charging)|
|Operating temperature range||-20 to +60°C|
|Dimensions (mm)||365(H) x 250(W) x 147(D)|
- 1: Victron Skylla Charger 24-48V Datasheet (269kB)
- 2: Victron Skylla 24V30-50 Titan 48V25 Manual (443kB)
- 3: Victron Energy Warranty (121kB)
- 4: Victron Skylla Charger 24-48V Dimensions (17kB)