Victron SmartSolar MPPT Regulator - 150/70 - VE.Can
DescriptionCompact Maximum Power Point Tracking (MPPT) Charge Controller
The MPPT VE.Can SmartSolar charger uses the latest and fastest technology to convert energy from a solar array into energy that optimally charges a battery banks.
The SmartSolar charge controller will even recharge a severely depleted battery. It can operate with a battery voltage as low as 0 volts, provided the cells are not permanently sulphated or otherwise damaged.
The 150/70-MPPT VE.Can SmartSolar charger connects to a PV array of 150 volt Voc and will automatically detect and charge your 12, 24, or 48V battery bank with current of 70A.
The charge settings are fully programmable and can even be set up for different battery chemistries, like lead-acid, lithium and others.
The MPPT VE.Can SmartSolar charger can be remotely controlled and configured over Bluetooth via the VictronConnect App. This allows device set-up, management, and at-a-glance information, such as battery voltage and current, PV voltage and current, and historical data.
The VE.Can SmartSolar charger is equipped with CAN bus ports. This allows for communication with additional VE.Can SmartSolar chargers. The additional units are simply "daisy chained" to each other with a single RJ45 cable between the individual units.
When connected to each other, all individual VE.Can SmartSolar chargers, will synchronise their charge stages. They can also send their data, via a single cable, to a GX monitoring device.
- Bluetooth inside (dongle not needed)
- VE.Can / VE.Directbus ports
- Optional pluggable LCD display [RGX-VM001]
- with screw terminals (35 mm²/ AWG2)
Weight: 3.6 Kilograms
|Victron SmartSolar MPPT Regulator - 150/70 - VE.Can|
|Nominal system voltage||12V, 24V, 36V or 48V (auto select)|
|Rated charge current||70A|
|Maximum PV open circuit voltage||150V|
|Nominal PV power (input)|
|Max. PV short circuit current||50A|
|Charge voltage in absorption mode|
|Charge voltage in float mode|
|Protection class electronic components||IP43|
|Protection class connection area||IP22|
|Dimensions (mm)||185(H) x 250(W) x 95(D)|
|Model||SmartSolar MPPT 150/70-Tr VE.Can|
- 1: Victron SmartSolar VE Can 150 70-100 Datasheet (378kB)
- 2: Victron SmartSolar VE Can 150-250 70-100 Manual (8717kB)
- 3: Victron Energy Warranty (121kB)